Paint a 12x12 Bedroom: A Complete Worked Estimate

A step-by-step paint estimate for a 12 by 12 foot bedroom with an 8 foot ceiling, one door and one window.

A square spare bedroom is often the first repaint in a house, and it is a useful size to learn on because the arithmetic stays tidy while still teaching every stage of estimating. This worked example covers one specific room from bare measurement through to the final shopping list, including the ceiling. Nothing here is a guess at what a typical room might need — every figure follows from the dimensions below, so you can follow the same chain for a room of your own.

The room we are painting

The bedroom measures 12 ft by 12 ft on the floor, which is 3.66 m by 3.66 m. The ceiling sits 8 ft above the floor, or 2.44 m. There is a single interior door on one wall and one window on another, and no built-in wardrobes, chimney breast, or alcove to adjust for. The walls are previously painted plaster in sound condition, and the plan is two coats of emulsion on the walls plus two coats on the ceiling, in different colours, so the two surfaces are estimated separately and bought separately.

That separation matters. Wall paint and ceiling paint are rarely the same product or the same finish, and combining their areas into one total would leave you short on one colour and long on the other.

Step one: gross wall area

Start with the perimeter. Add the four walls together:

12 ft + 12 ft + 12 ft + 12 ft = 48 ft of perimeter (14.63 m)

Multiply perimeter by ceiling height to get the gross wall area before any deductions:

48 ft × 8 ft = 384 sq ft (35.67 sq m)

This is the figure you would use if the room had no openings at all. It is a starting point, never the buying figure.

Step two: deduct the door and window

Openings do not get painted with wall paint, so they come off the total. The combined deduction for the one door and the one window in this room is 36 sq ft (3.34 sq m), which breaks down as a standard interior door with its frame and a modest single window. Subtract it:

384 sq ft − 36 sq ft = 348 sq ft of net wall area (32.33 sq m)

Deducting openings is worth doing on a room like this because 36 sq ft is close to a tenth of the gross area. On a much larger wall the same door would matter less in percentage terms, but the habit of measuring openings keeps small-room estimates honest.

Step three: turn area into paint for the walls

The paint used here is rated at 350 sq ft per gallon per coat, which is about 32.5 sq m per 3.79 L. Two coats are planned, so the area that actually has to be covered is doubled:

348 sq ft × 2 coats = 696 sq ft of coverage needed

696 sq ft ÷ 350 sq ft per gallon = 1.99 gallons

That is 7.53 litres. Because paint is sold in whole cans, the buying decision rounds up rather than down:

Walls: 1.99 gal needed (7.53 L), buy 2 gallon cans.

Rounding down to a single gallon would leave the second coat roughly half finished, which is the worst possible point to run out — the first coat is sealed, the colour is mixed, and a fresh can bought later may not match the batch on the wall exactly.

You can check your own room in seconds with the Paint Calculator, which runs this same perimeter, deduction, and coverage sequence.

Step four: the ceiling, calculated on its own

The ceiling is a simple rectangle with the same footprint as the floor:

12 ft × 12 ft = 144 sq ft (13.38 sq m)

There are no deductions here because the light fitting is small enough to paint around rather than subtract. Two coats are planned on a smooth ceiling:

144 sq ft × 2 coats = 288 sq ft of coverage needed

288 sq ft ÷ 350 sq ft per gallon = 0.82 gallons

That is 3.11 litres, so the purchase is:

Ceiling: 0.82 gal needed (3.11 L), buy 1 gallon can.

Notice how the ceiling needs less than half the wall quantity despite looking like a large surface. It has no openings removed, but it is only one face of the room, while the walls are four faces added together.

Full shopping list

Item Quantity needed Buy
Wall emulsion 1.99 gal (7.53 L) 2 gallon cans
Ceiling emulsion 0.82 gal (3.11 L) 1 gallon can
Primer for patched areas Enough for spot priming only 1 small can
Painter’s tape To mask 48 ft of skirting and ceiling line, plus door and window frames 2 rolls
Dust sheets To cover a 12 × 12 ft floor (144 sq ft / 13.38 sq m) 2 sheets
Roller sleeves One for walls, one for ceiling, plus a spare 3 sleeves
Sandpaper for prep For scuffing and filler smoothing 1 assorted pack
Ready-mixed filler For nail holes and hairline cracks 1 tub

The tape figure deserves a brief explanation. The ceiling line alone runs the full 48 ft (14.63 m) perimeter, and the skirting at floor level runs almost the same distance once the doorway is skipped. Add the door architrave and the window frame, and a single short roll is rarely enough, which is why two rolls appear on the list rather than one.

Order of work

Preparation comes before any can is opened. Move furniture to the centre of the room or out of it entirely, lay the dust sheets across the whole 144 sq ft (13.38 sq m) floor, fill defects, and sand once the filler has dried. Mask the ceiling line, skirting, door frame, and window frame.

Paint the ceiling first. If wall paint goes on first, ceiling splashes land on finished work; working top-down avoids that. Cut in around the light fitting and the edges, then roll the first coat, allow it to dry fully, and apply the second.

Walls follow. Cut in at the ceiling line, around the door and window, and above the skirting, then roll each wall in sections while the cut edge is still wet so no hard line forms. Apply the second coat only after the first is properly dry, not merely touch-dry. Remove tape while the final coat is still slightly wet to get a clean edge, then refit sockets covers and move furniture back once the paint has hardened.

For a deeper walk-through of the same 12 by 12 geometry, see how much paint for a 12x12 room.

Mistakes specific to this project

The most common error in a square bedroom is treating the ceiling as part of the wall total and buying one colour for everything, then realising the quantities per colour are wrong. Keep the two estimates apart from the first measurement onward.

A second error is forgetting the second coat in the arithmetic. Dividing 348 sq ft by 350 gives almost exactly one gallon, which feels satisfyingly neat and tempts people to buy a single can. That figure covers one coat only. The plan calls for two, and the true requirement is 1.99 gal (7.53 L).

A third mistake is skipping the opening deduction on paper but then also painting the wall inside a shallow recess or behind a door as if it were extra. Pick one consistent method: measure net area, buy for net area, and paint exactly the surfaces you measured.

Finally, do not stir old leftover paint into a fresh can to stretch it. Different batches and ages can shift colour and sheen just enough to show on a large flat wall under window light. Buy the full 2 cans for the walls, keep what remains sealed for touch-ups, and label the lid with the room and date.


Next step: re-run this estimate with your own bedroom's dimensions in the Paint Calculator and the Ceiling Paint Calculator, keeping the two surfaces as separate orders exactly as here. Your shopping list is then this page with different numbers.